hdc

OpenHarmony Device Connector (hdc) is a command-line tool used for debugging. You can use it on a Windows, Linux, or macOS system to interact with real devices or simulators.

The following describes how to obtain and use hdc.

How to Obtain

Obtaining hdc

Obtain hdc from the toolchains directory of the OpenHarmony SDK.

Example

The following uses the Windows operating system as an example:

Obtain the SDK for Windows, and copy hdc.exe from toolchains to a directory on the disk.

NOTICE

• If an exception occurs when you are using hdc, run the hdc kill command to terminate the hdc service or run the hdc start -r command to restart the service process.

• If no device information is obtained after hdc list targets is executed, check whether the hdc process exists in the Task Manager. If yes, terminate the process.

Option-related Commands

The following commands are available:

• -h/help -v/version Displays hdc help or version information.

Table 1 Command description

Example:

  hdc -h / hdc help

  hdc -v / hdc version

• -l 0-5 Sets the levels of the logs generated during the running of the tool. The default value is LOG_INFO.

Table 2 Command description

Example:

  hdc -l5 start

• -t key Connects to a device based on the specified key.

Table 3 Command description

Example:

-t key must be used with a command. The following uses shell as an example:

hdc list targets (Obtain device information.)

hdc -t key shell (Replace key with the device identifier obtained)

NOTE
You can connect to multiple devices from the device you use for development. Each device has a unique key. The key can be IP address:port number for a device to be connected over the network or the serial number for a device to be connected through USB. A specific command must be used with this command.

• checkserver Obtains the client and server version information.

Table 4 Command description

Example:

  hdc checkserver

Displaying Device Information

Run the following command to display all connected devices:

list targets[-v]

Table 5 Command description

Example:

hdc list targets

hdc list targets -v

Service Process Commands

The following commands are available:

• target mount Mounts the /system partition in read/write mode.

Table 6 Command description

Example:

  hdc target mount

• target boot Boots the device.

Example:

  hdc target boot

• smode [-r] Grants the root permission to the background hdc service. Use off to revoke the granted permissions.

Example:

  hdc smode

  hdc smode -r

• kill [-r] Terminates the hdc process.

Table 7 Command description

Example:

  hdc kill

• start [-r] Starts the hdc process.

Table 8 Command description

Example:

  hdc start

Network Commands

The following commands are available:

• tconn host[:port][-remove] Connects to a device with the specified IP address and port number.

Table 9 Command description

Example:

  hdc tconn 192.168.0.100:8710

• tmode usb Restarts the daemon process and connects to the device using USB preferentially.

Table 10 Command description

Example:

  hdc tmode usb

• tmode port port-number Restarts the daemon process and connects to the device over TCP preferentially. If the TCP connection fails, a USB connection will be initiated.

Table 11 Command description

Example:

  hdc tmode port 8710

NOTE
After this command is executed, the remote daemon process exits and restarts, and a TCP connection is set up by default. If the port number is not specified in the command, a random port will be used to connect to the device.

• fport localnode remotenode Forwards data from a host port to a device port.

Example:

  hdc fport tcp:1234 tcp:1080

• rport remotenode localnode Forwards data from a device port to a host port.

Example:

  hdc rport tcp:2080 tcp:2345

• fport ls Lists all port forwarding tasks.

Table 12 Command description

Example:

  hdc fport ls

• fport rm Deletes a port forwarding task.

Example:

  hdc fport rm tcp:1234 tcp:1080

File Commands

The following commands are available:

• file send local remote Sends a file to a remote device.

Table 13 Command description

Example:

  hdc file send E:\a.txt   /data/local/tmp/a.txt

• file recv [-a] remote local Receives a file from a remote device.

Table 14 Command description

Example:

  hdc file recv  /data/local/tmp/a.txt   ./a.txt

App Commands

The following commands are available:

• install [-r/-d/-g] *package* Installs an OpenHarmony app.

Table 15 Command description

Example:

  hdc install hwadmin.hap

• uninstall [-k] package Uninstalls an OpenHarmony app.

Table 16 Command description

Example:

  hdc uninstall package

Debugging Commands

The following commands are available:

• hilog Obtains logs for debugging.

Table 17 Command description

Example: Obtain log information.

  hdc hilog

Clear the cached logs.

  hdc shell "hilog -r"

• shell [command] Executes a command remotely or enters an interactive command environment.

Table 18 Command description

Example:

  hdc shell

• jpid Obtains the list of processes that can be debugged.

Example:

  hdc jpid

FAQs

Failed to Connect the Target Device

• Symptom After the hdc list targets command is executed, [Empty] is displayed.

• Solution

  • The device cannot be identified. Check whether HDC Device exists under the Universal Serial Bus controllers in the Device Manager. If HDC Device does not exist, the device cannot be connected. In this case, disconnect and then reconnect the USB connection between the test PC and the OpenHarmony device, or burn the latest image.
  • hdc works improperly. Run the hdc kill command to terminate the hdc process or run the hdc start -r command to restart the hdc service. Then, run the hdc list targets command to check whether device information can be obtained.
  • The hdc version does not match the device. If the latest image is burnt on the device, the latest hdc version must be used.

Failed to Run hdc

• Symptom The hdc.exe file cannot be executed.

• Solution

  1. Check the running environment. Ubuntu 18.04 64-bit or later is recommended for Linux.
     If libc++.so is incorrectly referenced, run the ldd or readelf command to check the referenced library.
     Windows 10 64-bit is recommended for Windows. If the Windows winusb library of an earlier version is missing, use Zadig to update the library. For composite devices, use Zadig tool to install the libusb-win32 driver.
  2. Run hdc.exe. hdc.exe requires no installation. You can use it after placing it to a local directory or adding the tool path to environment variables. Run cmd and then the hdc command to start the tool.

Accessing a hdc Server from the hdc Client

• Scenario

Use hdc to connect to a remote server from the local client.

• Procedure
  1. Shut down the local hdc server. hdc kill
  2. Run -s [ip:]port -m to start the remote server. hdc -s severIP:8710 -m
  3. Run -s [ip:]port command to execute a command on the remote server. hdc -s severIP:8710 list targets

你可能感兴趣的鸿蒙文章

harmony 鸿蒙Subsystems

harmony 鸿蒙AI Framework Development Guide

harmony 鸿蒙NNRt Access Adaptation

harmony 鸿蒙Application Privilege Configuration

harmony 鸿蒙Development Example

harmony 鸿蒙Setting Up a Development Environment

harmony 鸿蒙Development Guidelines

harmony 鸿蒙Application Framework Overview

harmony 鸿蒙ArkCompiler Development

harmony 鸿蒙Custom Window Title Bar Development