RTC

Overview

The real-time clock (RTC) is a real-time clock device in the operating system. In the Hardware Driver Foundation (HDF), the RTC uses the independent service mode for API adaptation. In this mode, each device independently publishes a service to process external access requests. When receiving an access request, the HDF DeviceManager extracts parameters from the request to call the internal APIs of the target device. In the independent service mode, the HDF DeviceManager provides service management capabilities. However, you need to configure a node for each device, which increases memory usage.

Figure 1 Independent service mode

Available APIs

RtcMethod:

struct RtcMethod {
    int32_t (*ReadTime)(struct RtcHost *host, struct RtcTime *time);
    int32_t (*WriteTime)(struct RtcHost *host, const struct RtcTime *time);
    int32_t (*ReadAlarm)(struct RtcHost *host, enum RtcAlarmIndex alarmIndex, struct RtcTime *time);
    int32_t (*WriteAlarm)(struct RtcHost *host, enum RtcAlarmIndex alarmIndex, const struct RtcTime *time);
    int32_t (*RegisterAlarmCallback)(struct RtcHost *host, enum RtcAlarmIndex alarmIndex, RtcAlarmCallback cb);
    int32_t (*AlarmInterruptEnable)(struct RtcHost *host, enum RtcAlarmIndex alarmIndex, uint8_t enable);
    int32_t (*GetFreq)(struct RtcHost *host, uint32_t *freq);
    int32_t (*SetFreq)(struct RtcHost *host, uint32_t freq);
    int32_t (*Reset)(struct RtcHost *host);
    int32_t (*ReadReg)(struct RtcHost *host, uint8_t usrDefIndex, uint8_t *value);
    int32_t (*WriteReg)(struct RtcHost *host, uint8_t usrDefIndex, uint8_t value);
};

Table 1 Description of the callback functions in RtcMethod

How to Develop

The RTC module adaptation involves the following steps:

1. Instantiate the driver entry.

   • Instantiate the HdfDriverEntry structure.
   • Call HDF_INIT to register the HdfDriverEntry instance with the HDF.

2. Configure attribute files.

   • Add the deviceNode information to the device_info.hcs file.
   • (Optional) Add the rtc_config.hcs file.

3. Instantiate the RTC controller object.

   • Initialize RtcHost.
   • Instantiate RtcMethod in the RtcHost object. > NOTE
     > For details about the functions in RtcMethod, see Available APIs.

4. Debug the driver.

(Optional) For new drivers, verify the basic functions, such as the RTC status control and response to interrupts.

Development Example

The following uses rtc_hi35xx.c as an example to present the information required for implementing device functions.

1. Instantiate the driver entry.

The driver entry must be a global variable of the HdfDriverEntry type (defined in hdf_device_desc.h), and the value of moduleName must be the same as that in device_info.hcs.

In the HDF, the start address of each HdfDriverEntry object of all loaded drivers is collected to form a segment address space similar to an array for the upper layer to invoke.

Generally, the HDF calls the Bind function and then the Init function to load a driver. If Init fails to be called, the HDF calls Release to release driver resources and exit.

RTC driver entry example:

   struct HdfDriverEntry g_rtcDriverEntry = {
     .moduleVersion = 1,
     .Bind = HiRtcBind,                // See the Bind function.
     .Init = HiRtcInit,                // See the Init function.
     .Release = HiRtcRelease,          //See the Release function.
     .moduleName = "HDF_PLATFORM_RTC", // (Mandatory) The value must be the same as that in the .hcs file.
   };
   // Call HDF_INIT to register the driver entry with the HDF.
   HDF_INIT(g_rtcDriverEntry);

1. Add the deviceNode information to the device_info.hcs file and configure the device attributes in the rtc_config.hcs file.

The deviceNode information is related to registration of the driver entry. The device attribute values are closely related to the default values or value ranges of the RtcHost members at the core layer.

In this example, there is only one RTC controller. If there are multiple RTC controllers, you need to add the deviceNode information to the device_info file and add the corresponding device attributes to the rtc_config file for each controller.

• device_info.hcs configuration example

   root {
     device_info {
       platform :: host {
         device_rtc :: device {
           device0 :: deviceNode {
             policy = 1;                              // The driver publishes services for kernel-mode processes only.
             priority = 30;                           // A smaller value indicates a higher priority.
             permission = 0644;                       // Permission for the driver to create a device node
             moduleName = "HDF_PLATFORM_RTC";         // (Mandatory) Driver name, which must be the same as moduleName in the driver entry.
             serviceName = "HDF_PLATFORM_RTC";        // (Mandatory) Unique name of the service published by the driver.
             deviceMatchAttr = "hisilicon_hi35xx_rtc";// The value must be the same as that of match_attr in the .hcs file.
           }
         }
       }
     }
   }
  

• rtc_config.hcs configuration example

   root {
     platform {
       rtc_config {
         controller_0x12080000 {
           match_attr = "hisilicon_hi35xx_rtc";// (Mandatory) The value must be the same as that of deviceMatchAttr in device_info.hcs.
           rtcSpiBaseAddr = 0x12080000;        // Used for address mapping.
           regAddrLength = 0x100;              // Used for address mapping.
           irq = 37;                           // Interrupt number.
           supportAnaCtrl = false;
           supportLock = false;
           anaCtrlAddr = 0xff;
           lock0Addr = 0xff;
           lock1Addr = 0xff;
           lock2Addr = 0xff;
           lock3Addr = 0xff;
         }
       }
     }
   }
  

• Initialize the RtcHost object at the core layer, including defining a custom structure (to pass parameters and data) and implementing the HdfDriverEntry member functions (Bind, Init, and Release) to instantiate RtcMethod in RtcHost (so that the underlying driver functions can be called).

  • Defining a custom structure

  To the driver, the custom structure holds parameters and data. The DeviceResourceIface method provided by the HDF reads the values in the rtc_config.hcs file to initialize the members in the custom structure.

    struct RtcConfigInfo {
      uint32_t           spiBaseAddr;     // Used for address mapping.
      volatile void      *remapBaseAddr;  // Used for address mapping.
      uint16_t           regAddrLength;   // Used for address mapping.
      uint8_t            supportAnaCtrl;  // Whether ANACTRL is supported.
      uint8_t            supportLock;     // Whether lock is supported.
      uint8_t            irq;             // Interrupt number.
      uint8_t            alarmIndex;      // RTC alarm index.
      uint8_t            anaCtrlAddr;     // ANACTRL address.
      struct RtcLockAddr lockAddr;        // Lock address.
      RtcAlarmCallback   cb;              // Callback.
      struct OsalMutex   mutex;           // Mutex.
    };
  
  
    // RtcHost is the controller structure at the core layer. The Init function assigns values to the members of RtcHost.
    struct RtcHost {
        struct IDeviceIoService service;
        struct HdfDeviceObject *device;
        struct RtcMethod *method;
        void *data;
    };
  

  • Instantiating RtcMethod in RtcHost (other members are initialized by Init)

     // Example in rtc_hi35xx.c: instantiate the hook.
     static struct RtcMethod g_method = {
    .ReadTime   = HiRtcReadTime,
    .WriteTime  = HiRtcWriteTime,
    .ReadAlarm  = HiReadAlarm,
    .WriteAlarm = HiWriteAlarm,
    .RegisterAlarmCallback  = HiRegisterAlarmCallback,
    .AlarmInterruptEnable   = HiAlarmInterruptEnable,
    .GetFreq  = HiGetFreq,
    .SetFreq  = HiSetFreq,
    .Reset       = HiReset,
    .ReadReg  = HiReadReg,
    .WriteReg = HiWriteReg,
     };
  

  • Bind function

  Input parameter:

  HdfDeviceObject, an interface parameter exposed by the driver, contains the .hcs information.

  Return value:

  HDF_STATUS

  The table below describes some status. For more information, see HDF_STATUS in the /drivers/framework/include/utils/hdf_base.h file.

  Table 2 Description of HDF_STATUS

|Status |Description | |———————-|————————–| |HDF_ERR_INVALID_OBJECT|Invalid controller object.| |HDF_ERR_MALLOC_FAIL |Failed to allocate memory.| |HDF_ERR_INVALID_PARAM|Invalid parameter. | |HDF_ERR_IO |I/O error. | |HDF_SUCCESS |Initialization successful.| |HDF_FAILURE |Initialization failed. |

 **Function description**:

  Binds the **HdfDeviceObject** object and **RtcHost**.

 ```
 static int32_t HiRtcBind(struct HdfDeviceObject *device)
    {
      struct RtcHost *host = NULL;  
      host = RtcHostCreate(device);    // Allocate memory and attach the device host with the device.
                                       // Prerequisite for conversion between HdfDeviceObject and RtcHost.
      ...
      device->service = &host->service; // Prerequisite for conversion between HdfDeviceObject and RtcHost.
                                       // It helps implement a global host by calling RtcHostFromDevice.
   return HDF_SUCCESS;
    }
 ```

• Init function

  Input parameter:

  HdfDeviceObject, an interface parameter exposed by the driver, contains the .hcs information.

  Return value:

  HDF_STATUS

  Function description:

  Initializes the custom structure object and RtcHost.

   static int32_t HiRtcInit(struct HdfDeviceObject *device)
       {
         struct RtcHost *host = NULL;
         struct RtcConfigInfo *rtcInfo = NULL;
         ...
         host = RtcHostFromDevice(device);// Forcibly convert HdfDeviceObject to RtcHost.
         rtcInfo = OsalMemCalloc(sizeof(*rtcInfo));
         ...
         // HiRtcConfigData reads attributes from the device configuration tree and fills in supportAnaCtrl, supportLock, spiBaseAddr, regAddrLength and irq of RTCInfo.
         // Provide parameters for HiRtcSwInit and HiRtcSwInit. When HiRtcSwInit and HiRtcSwInit fail to be executed internally, Release() can be called to release memory.
         if (HiRtcConfigData(rtcInfo, device->property) != 0) {
           ...
         }
         if (HiRtcSwInit(rtcInfo)! = 0) {// Address mapping and interrupt registration.
           ...
         }
         if (HiRtcHwInit(rtcInfo)! = 0) {// Initialize ANACTRL and lockAddr.
           ...
         }
  
  
         host->method = &g_method; // Attach the RtcMethod instance.
         host->data = rtcInfo;     // Prerequisites for conversion between RtcConfigInfo and RtcHost.
         HDF_LOGI("Hdf dev service:%s init success!", HdfDeviceGetServiceName(device));
         return HDF_SUCCESS;
  	 }
  

• Release function

  Input parameter:

  HdfDeviceObject, an interface parameter exposed by the driver, contains the .hcs information.

  Return value:

  No value is returned.

  Function description:

  Releases the memory and deletes the controller. This function assigns values to the Release function in the driver entry structure. If the HDF fails to call the Init function to initialize the driver, the Release function can be called to release driver resources.

  NOTE
  All forced conversion operations for obtaining the corresponding object can be successful only when the Init or Bind function has the corresponding value assignment operations.

   static void HiRtcRelease(struct HdfDeviceObject *device)
       {
        struct RtcHost *host = NULL;
        struct RtcConfigInfo *rtcInfo = NULL;
        ...
        host = RtcHostFromDevice(device);            // Forcibly convert HdfDeviceObject to RtcHost.
        rtcInfo = (struct RtcConfigInfo *)host->data;// Forcibly convert RtcHost to RtcConfigInfo.
        if (rtcInfo != NULL) {
            HiRtcSwExit(rtcInfo);
            OsalMemFree(rtcInfo);                    // Release RtcConfigInfo.
            host->data = NULL;
        }
        RtcHostDestroy(host);                        // Release RtcHost.
       }
  

你可能感兴趣的鸿蒙文章

harmony 鸿蒙Drivers

harmony 鸿蒙HDF Driver Development Process

harmony 鸿蒙Driver Overview

harmony 鸿蒙Audio

harmony 鸿蒙Camera

harmony 鸿蒙Codec

harmony 鸿蒙WLAN

harmony 鸿蒙Facial Authentication

harmony 鸿蒙Fingerprint Authentication

harmony 鸿蒙LCD