kafka TopicConfig 源码

  • 2022-10-20
  • 浏览 (592)

kafka TopicConfig 代码

文件路径:/clients/src/main/java/org/apache/kafka/common/config/TopicConfig.java

/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements. See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package org.apache.kafka.common.config;

/**
 * <p>Keys that can be used to configure a topic. These keys are useful when creating or reconfiguring a
 * topic using the AdminClient.
 *
 * <p>The intended pattern is for broker configs to include a <code>`log.`</code> prefix. For example, to set the default broker
 * cleanup policy, one would set <code>log.cleanup.policy</code> instead of <code>cleanup.policy</code>. Unfortunately, there are many cases
 * where this pattern is not followed.
 */
// This is a public API, so we should not remove or alter keys without a discussion and a deprecation period.
// Eventually this should replace LogConfig.scala.
public class TopicConfig {
    public static final String SEGMENT_BYTES_CONFIG = "segment.bytes";
    public static final String SEGMENT_BYTES_DOC = "This configuration controls the segment file size for " +
        "the log. Retention and cleaning is always done a file at a time so a larger segment size means " +
        "fewer files but less granular control over retention.";

    public static final String SEGMENT_MS_CONFIG = "segment.ms";
    public static final String SEGMENT_MS_DOC = "This configuration controls the period of time after " +
        "which Kafka will force the log to roll even if the segment file isn't full to ensure that retention " +
        "can delete or compact old data.";

    public static final String SEGMENT_JITTER_MS_CONFIG = "segment.jitter.ms";
    public static final String SEGMENT_JITTER_MS_DOC = "The maximum random jitter subtracted from the scheduled " +
        "segment roll time to avoid thundering herds of segment rolling";

    public static final String SEGMENT_INDEX_BYTES_CONFIG = "segment.index.bytes";
    public static final String SEGMENT_INDEX_BYTES_DOC = "This configuration controls the size of the index that " +
        "maps offsets to file positions. We preallocate this index file and shrink it only after log " +
        "rolls. You generally should not need to change this setting.";

    public static final String FLUSH_MESSAGES_INTERVAL_CONFIG = "flush.messages";
    public static final String FLUSH_MESSAGES_INTERVAL_DOC = "This setting allows specifying an interval at " +
        "which we will force an fsync of data written to the log. For example if this was set to 1 " +
        "we would fsync after every message; if it were 5 we would fsync after every five messages. " +
        "In general we recommend you not set this and use replication for durability and allow the " +
        "operating system's background flush capabilities as it is more efficient. This setting can " +
        "be overridden on a per-topic basis (see <a href=\"#topicconfigs\">the per-topic configuration section</a>).";

    public static final String FLUSH_MS_CONFIG = "flush.ms";
    public static final String FLUSH_MS_DOC = "This setting allows specifying a time interval at which we will " +
        "force an fsync of data written to the log. For example if this was set to 1000 " +
        "we would fsync after 1000 ms had passed. In general we recommend you not set " +
        "this and use replication for durability and allow the operating system's background " +
        "flush capabilities as it is more efficient.";

    public static final String RETENTION_BYTES_CONFIG = "retention.bytes";
    public static final String RETENTION_BYTES_DOC = "This configuration controls the maximum size a partition " +
        "(which consists of log segments) can grow to before we will discard old log segments to free up space if we " +
        "are using the \"delete\" retention policy. By default there is no size limit only a time limit. " +
        "Since this limit is enforced at the partition level, multiply it by the number of partitions to compute " +
        "the topic retention in bytes.";

    public static final String RETENTION_MS_CONFIG = "retention.ms";
    public static final String RETENTION_MS_DOC = "This configuration controls the maximum time we will retain a " +
        "log before we will discard old log segments to free up space if we are using the " +
        "\"delete\" retention policy. This represents an SLA on how soon consumers must read " +
        "their data. If set to -1, no time limit is applied.";

    public static final String REMOTE_LOG_STORAGE_ENABLE_CONFIG = "remote.storage.enable";
    public static final String REMOTE_LOG_STORAGE_ENABLE_DOC = "To enable tier storage for a topic, set `remote.storage.enable` as true. " +
            "You can not disable this config once it is enabled. It will be provided in future versions.";

    public static final String LOCAL_LOG_RETENTION_MS_CONFIG = "local.retention.ms";
    public static final String LOCAL_LOG_RETENTION_MS_DOC = "The number of milli seconds to keep the local log segment before it gets deleted. " +
            "Default value is -2, it represents `retention.ms` value is to be used. The effective value should always be less than or equal " +
            "to `retention.ms` value.";

    public static final String LOCAL_LOG_RETENTION_BYTES_CONFIG = "local.retention.bytes";
    public static final String LOCAL_LOG_RETENTION_BYTES_DOC = "The maximum size of local log segments that can grow for a partition before it " +
            "deletes the old segments. Default value is -2, it represents `retention.bytes` value to be used. The effective value should always be " +
            "less than or equal to `retention.bytes` value.";

    public static final String MAX_MESSAGE_BYTES_CONFIG = "max.message.bytes";
    public static final String MAX_MESSAGE_BYTES_DOC =
        "The largest record batch size allowed by Kafka (after compression if compression is enabled). " +
        "If this is increased and there are consumers older than 0.10.2, the consumers' fetch " +
        "size must also be increased so that they can fetch record batches this large. " +
        "In the latest message format version, records are always grouped into batches for efficiency. " +
        "In previous message format versions, uncompressed records are not grouped into batches and this " +
        "limit only applies to a single record in that case.";

    public static final String INDEX_INTERVAL_BYTES_CONFIG = "index.interval.bytes";
    public static final String INDEX_INTERVAL_BYTES_DOC = "This setting controls how frequently " +
        "Kafka adds an index entry to its offset index. The default setting ensures that we index a " +
        "message roughly every 4096 bytes. More indexing allows reads to jump closer to the exact " +
        "position in the log but makes the index larger. You probably don't need to change this.";

    public static final String FILE_DELETE_DELAY_MS_CONFIG = "file.delete.delay.ms";
    public static final String FILE_DELETE_DELAY_MS_DOC = "The time to wait before deleting a file from the " +
        "filesystem";

    public static final String DELETE_RETENTION_MS_CONFIG = "delete.retention.ms";
    public static final String DELETE_RETENTION_MS_DOC = "The amount of time to retain delete tombstone markers " +
        "for <a href=\"#compaction\">log compacted</a> topics. This setting also gives a bound " +
        "on the time in which a consumer must complete a read if they begin from offset 0 " +
        "to ensure that they get a valid snapshot of the final stage (otherwise delete " +
        "tombstones may be collected before they complete their scan).";

    public static final String MIN_COMPACTION_LAG_MS_CONFIG = "min.compaction.lag.ms";
    public static final String MIN_COMPACTION_LAG_MS_DOC = "The minimum time a message will remain " +
        "uncompacted in the log. Only applicable for logs that are being compacted.";

    public static final String MAX_COMPACTION_LAG_MS_CONFIG = "max.compaction.lag.ms";
    public static final String MAX_COMPACTION_LAG_MS_DOC = "The maximum time a message will remain " +
        "ineligible for compaction in the log. Only applicable for logs that are being compacted.";

    public static final String MIN_CLEANABLE_DIRTY_RATIO_CONFIG = "min.cleanable.dirty.ratio";
    public static final String MIN_CLEANABLE_DIRTY_RATIO_DOC = "This configuration controls how frequently " +
        "the log compactor will attempt to clean the log (assuming <a href=\"#compaction\">log " +
        "compaction</a> is enabled). By default we will avoid cleaning a log where more than " +
        "50% of the log has been compacted. This ratio bounds the maximum space wasted in " +
        "the log by duplicates (at 50% at most 50% of the log could be duplicates). A " +
        "higher ratio will mean fewer, more efficient cleanings but will mean more wasted " +
        "space in the log. If the " + MAX_COMPACTION_LAG_MS_CONFIG + " or the " + MIN_COMPACTION_LAG_MS_CONFIG +
        " configurations are also specified, then the log compactor considers the log to be eligible for compaction " +
        "as soon as either: (i) the dirty ratio threshold has been met and the log has had dirty (uncompacted) " +
        "records for at least the " + MIN_COMPACTION_LAG_MS_CONFIG + " duration, or (ii) if the log has had " +
        "dirty (uncompacted) records for at most the " + MAX_COMPACTION_LAG_MS_CONFIG + " period.";

    public static final String CLEANUP_POLICY_CONFIG = "cleanup.policy";
    public static final String CLEANUP_POLICY_COMPACT = "compact";
    public static final String CLEANUP_POLICY_DELETE = "delete";
    public static final String CLEANUP_POLICY_DOC = "This config designates the retention policy to " +
        "use on log segments. The \"delete\" policy (which is the default) will discard old segments " +
        "when their retention time or size limit has been reached. The \"compact\" policy will enable " +
        "<a href=\"#compaction\">log compaction</a>, which retains the latest value for each key. " +
        "It is also possible to specify both policies in a comma-separated list (e.g. \"delete,compact\"). " +
        "In this case, old segments will be discarded per the retention time and size configuration, " +
        "while retained segments will be compacted.";

    public static final String UNCLEAN_LEADER_ELECTION_ENABLE_CONFIG = "unclean.leader.election.enable";
    public static final String UNCLEAN_LEADER_ELECTION_ENABLE_DOC = "Indicates whether to enable replicas " +
        "not in the ISR set to be elected as leader as a last resort, even though doing so may result in data " +
        "loss.";

    public static final String MIN_IN_SYNC_REPLICAS_CONFIG = "min.insync.replicas";
    public static final String MIN_IN_SYNC_REPLICAS_DOC = "When a producer sets acks to \"all\" (or \"-1\"), " +
        "this configuration specifies the minimum number of replicas that must acknowledge " +
        "a write for the write to be considered successful. If this minimum cannot be met, " +
        "then the producer will raise an exception (either NotEnoughReplicas or " +
        "NotEnoughReplicasAfterAppend).<br>When used together, <code>min.insync.replicas</code> and <code>acks</code> " +
        "allow you to enforce greater durability guarantees. A typical scenario would be to " +
        "create a topic with a replication factor of 3, set <code>min.insync.replicas</code> to 2, and " +
        "produce with <code>acks</code> of \"all\". This will ensure that the producer raises an exception " +
        "if a majority of replicas do not receive a write.";

    public static final String COMPRESSION_TYPE_CONFIG = "compression.type";
    public static final String COMPRESSION_TYPE_DOC = "Specify the final compression type for a given topic. " +
        "This configuration accepts the standard compression codecs ('gzip', 'snappy', 'lz4', 'zstd'). It additionally " +
        "accepts 'uncompressed' which is equivalent to no compression; and 'producer' which means retain the " +
        "original compression codec set by the producer.";

    public static final String PREALLOCATE_CONFIG = "preallocate";
    public static final String PREALLOCATE_DOC = "True if we should preallocate the file on disk when " +
        "creating a new log segment.";

    /**
     * @deprecated since 3.0, removal planned in 4.0. The default value for this config is appropriate
     * for most situations.
     */
    @Deprecated
    public static final String MESSAGE_FORMAT_VERSION_CONFIG = "message.format.version";

    /**
     * @deprecated since 3.0, removal planned in 4.0. The default value for this config is appropriate
     * for most situations.
     */
    @Deprecated
    public static final String MESSAGE_FORMAT_VERSION_DOC = "[DEPRECATED] Specify the message format version the broker " +
        "will use to append messages to the logs. The value of this config is always assumed to be `3.0` if " +
        "`inter.broker.protocol.version` is 3.0 or higher (the actual config value is ignored). Otherwise, the value should " +
        "be a valid ApiVersion. Some examples are: 0.10.0, 1.1, 2.8, 3.0. By setting a particular message format version, the " +
        "user is certifying that all the existing messages on disk are smaller or equal than the specified version. Setting " +
        "this value incorrectly will cause consumers with older versions to break as they will receive messages with a format " +
        "that they don't understand.";

    public static final String MESSAGE_TIMESTAMP_TYPE_CONFIG = "message.timestamp.type";
    public static final String MESSAGE_TIMESTAMP_TYPE_DOC = "Define whether the timestamp in the message is " +
        "message create time or log append time. The value should be either `CreateTime` or `LogAppendTime`";

    public static final String MESSAGE_TIMESTAMP_DIFFERENCE_MAX_MS_CONFIG = "message.timestamp.difference.max.ms";
    public static final String MESSAGE_TIMESTAMP_DIFFERENCE_MAX_MS_DOC = "The maximum difference allowed between " +
        "the timestamp when a broker receives a message and the timestamp specified in the message. If " +
        "message.timestamp.type=CreateTime, a message will be rejected if the difference in timestamp " +
        "exceeds this threshold. This configuration is ignored if message.timestamp.type=LogAppendTime.";

    public static final String MESSAGE_DOWNCONVERSION_ENABLE_CONFIG = "message.downconversion.enable";
    public static final String MESSAGE_DOWNCONVERSION_ENABLE_DOC = "This configuration controls whether " +
        "down-conversion of message formats is enabled to satisfy consume requests. When set to <code>false</code>, " +
        "broker will not perform down-conversion for consumers expecting an older message format. The broker responds " +
        "with <code>UNSUPPORTED_VERSION</code> error for consume requests from such older clients. This configuration" +
        "does not apply to any message format conversion that might be required for replication to followers.";
}

相关信息

kafka 源码目录

相关文章

kafka AbstractConfig 源码

kafka Config 源码

kafka ConfigChangeCallback 源码

kafka ConfigData 源码

kafka ConfigDef 源码

kafka ConfigException 源码

kafka ConfigResource 源码

kafka ConfigTransformer 源码

kafka ConfigTransformerResult 源码

kafka ConfigValue 源码

0  赞