harmony 鸿蒙Fixing Compilation and Building Errors

  • 2022-12-05
  • 浏览 (684)

Fixing Compilation and Building Errors

“ImportError: No module named apt_pkg” is displayed during the execution of an unidentifiable command

  • Symptom

The message “ImportError: No module named apt_pkg” is displayed when an unidentifiable command is executed on the Linux server.

  • Possible Causes

There is a compatibility issue of python3-apt.

  • Solution

Reinstall python3-apt.

  sudo apt-get remove  python3-apt
  sudo apt-get install python3-apt

The message indicating Python cannot be found is displayed during the build process

  • Symptom

The following information is displayed during the build process:

  -bash: /usr/bin/python: No such file or directory
  • Possible Cause 1

Python is not installed.

  • Solution

Run the following command to install Python. The following uses Python 3.8 as an example.

  sudo apt-get install python3.8
  • Possible Cause 2

The soft link to Python does not exist in the usr/bin directory.

faq-python-error

  • Solution

Run the following commands to add the soft link to Python:

  # cd /usr/bin/ 
  # which python3
  # ln -s /usr/local/bin/python3 python
  # python --version

Example:

faq-python-add-soft-link

The message indicating Python 3 cannot be found is displayed during the build process

  • Symptom

faq-python3-not-found

  • Possible Causes

Python 3 is not installed.

  • Solution

Run the following command to install Python 3:

  sudo apt-get install python3.8

“configure: error: no acceptable C compiler found in $PATH” is displayed during Python 3 installation

  • Symptom

The following information is displayed during the Python 3 installation process:

  configure: error: no acceptable C compiler found in $PATH. See 'config.log' for more details
  • Possible Causes

GCC is not installed.

  • Solution
    1. Run the apt-get install gcc command to install gcc online.
    2. Install Python 3.

”-bash: make: command not found” is displayed during Python 3 installation

  • Symptom

The following information is displayed during the Python 3 installation process:

  -bash: make: command not found
  • Possible Causes

make is not installed.

  • Solution
    1. Run the apt-get install make command to install make online.
    2. Install Python 3.

“No module named ‘_ctypes’” is displayed during Python 3 installation

  • Symptom

The following information is displayed during the Python 3 installation process:

  ModuleNotFoundError: No module named '_ctypes'
  • Possible Causes

libffi and libffi-devel are not installed.

  • Solution
    1. Run the apt-get install libffi* -y command to install libffi and libffi-devel online.
    2. Install Python 3.

“No module named ‘Crypto’” is displayed during the build process

  • Symptom

The following information is displayed during the build process:

  ModuleNotFoundError: No module named 'Crypto'
  • Possible Causes

Crypto is not installed.

  • Solution Method 1: Run the pip3 install Crypto command to install Crypto online.

Method 2: Install Crypto offline.

Download the source code from PyPI.

faq-download-pycrypto

Save the source package to the Linux server, decompress the package, and run the python3 setup.py install command to install Crypto.

Start the build again.

(Hi3861) “No module named ‘ecdsa’” is displayed during the build process

  • Symptom

The following information is displayed during the build process:

  ModuleNotFoundError: No module named 'ecdsa'
  • Possible Causes

ecdsa is not installed.

  • Solution Method 1: Run the pip3 install ecdsa command to install ecdsa online.

Method 2: Offline installation

Download the installation package from PyPI.

faq-download-ecdsa

Save the installation package to the Linux server and run the pip3 install ecdsa-0.15-py2.py3-none-any.whl command to install ecdsa.

Start the build again.

(Hi3861)” Could not find a version that satisfies the requirement six>=1.9.0” is displayed during the build process

  • Symptom

The following information is displayed during the build process:

  Could not find a version that satisfies the requirement six>=1.9.0
  • Possible Causes

six is not installed.

  • Solution Method 1: Run the pip3 install six command to install six online.

Method 2: Install six offline.

Download the installation package from PyPI.

faq-download-six

Save the source code to the Linux server and run the pip3 install six-1.14.0-py2.py3-none-any.whl command to install six.

Start the build again.

(Hi3861) “cannot find -lgcc” is displayed during the build process

  • Symptom

The following information is displayed during the build process:

  riscv32-unknown-elf-ld: cannot find -lgcc
  • Possible Causes

The gcc_riscv32 path is incorrectly set as follows. There is an extra slash (/) after bin.

  ~/gcc_riscv32/bin/:/data/toolchain/
  • Solution

Modify the gcc_riscv32 path as follows:

  ~/gcc_riscv32/bin:/data/toolchain/

(Hi3861) An lsb_release error occurs during kconfiglib installation

  • Symptom

The following information is displayed during the kconfiglib installation process:

  subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
  • Possible Causes

The Python version matched with the lsb_release module is different from the current Python version.

  • Solution

Run the find / -name lsb_release command, for example, sudo rm -rf /usr/bin/lsb_release to locate and delete lsb_release.

你可能感兴趣的鸿蒙文章

harmony 鸿蒙Getting Started

harmony 鸿蒙Build Form Factors

harmony 鸿蒙Getting Started with the Standard System with Hi3516 (IDE Mode)

harmony 鸿蒙Getting Started with the Standard System with Hi3516 (CLI Mode)

harmony 鸿蒙Hi3516 Development Board

harmony 鸿蒙Hi3861 Development Board

harmony 鸿蒙RK3568 Development Board

harmony 鸿蒙Building Source Code

harmony 鸿蒙Burning an Image

harmony 鸿蒙Writing a Hello World Program

0  赞