golang iprawsock 代码
文件路径：/src/net/iprawsock.go
/ Copyright 2010 The Go Authors. All rights reserved.
/ Use of this source code is governed by a BSD-style
/ license that can be found in the LICENSE file.
package net
import (
"context"
"syscall"
)
/ BUG(mikio): On every POSIX platform, reads from the "ip4" network
/ using the ReadFrom or ReadFromIP method might not return a complete
/ IPv4 packet, including its header, even if there is space
/ available. This can occur even in cases where Read or ReadMsgIP
/ could return a complete packet. For this reason, it is recommended
/ that you do not use these methods if it is important to receive a
/ full packet.
/
/ The Go 1 compatibility guidelines make it impossible for us to
/ change the behavior of these methods; use Read or ReadMsgIP
/ instead.
/ BUG(mikio): On JS and Plan 9, methods and functions related
/ to IPConn are not implemented.
/ BUG(mikio): On Windows, the File method of IPConn is not
/ implemented.
/ IPAddr represents the address of an IP end point.
type IPAddr struct {
IP IP
Zone string / IPv6 scoped addressing zone
}
/ Network returns the address's network name, "ip".
func (a *IPAddr) Network() string { return "ip" }
func (a *IPAddr) String() string {
if a == nil {
return "<nil>"
}
ip := ipEmptyString(a.IP)
if a.Zone != "" {
return ip + "%" + a.Zone
}
return ip
}
func (a *IPAddr) isWildcard() bool {
if a == nil || a.IP == nil {
return true
}
return a.IP.IsUnspecified()
}
func (a *IPAddr) opAddr() Addr {
if a == nil {
return nil
}
return a
}
/ ResolveIPAddr returns an address of IP end point.
/
/ The network must be an IP network name.
/
/ If the host in the address parameter is not a literal IP address,
/ ResolveIPAddr resolves the address to an address of IP end point.
/ Otherwise, it parses the address as a literal IP address.
/ The address parameter can use a host name, but this is not
/ recommended, because it will return at most one of the host name's
/ IP addresses.
/
/ See func Dial for a description of the network and address
/ parameters.
func ResolveIPAddr(network, address string) (*IPAddr, error) {
if network == "" { / a hint wildcard for Go 1.0 undocumented behavior
network = "ip"
}
afnet, _, err := parseNetwork(context.Background(), network, false)
if err != nil {
return nil, err
}
switch afnet {
case "ip", "ip4", "ip6":
default:
return nil, UnknownNetworkError(network)
}
addrs, err := DefaultResolver.internetAddrList(context.Background(), afnet, address)
if err != nil {
return nil, err
}
return addrs.forResolve(network, address).(*IPAddr), nil
}
/ IPConn is the implementation of the Conn and PacketConn interfaces
/ for IP network connections.
type IPConn struct {
conn
}
/ SyscallConn returns a raw network connection.
/ This implements the syscall.Conn interface.
func (c *IPConn) SyscallConn() (syscall.RawConn, error) {
if !c.ok() {
return nil, syscall.EINVAL
}
return newRawConn(c.fd)
}
/ ReadFromIP acts like ReadFrom but returns an IPAddr.
func (c *IPConn) ReadFromIP(b []byte) (int, *IPAddr, error) {
if !c.ok() {
return 0, nil, syscall.EINVAL
}
n, addr, err := c.readFrom(b)
if err != nil {
err = &OpError{Op: "read", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
}
return n, addr, err
}
/ ReadFrom implements the PacketConn ReadFrom method.
func (c *IPConn) ReadFrom(b []byte) (int, Addr, error) {
if !c.ok() {
return 0, nil, syscall.EINVAL
}
n, addr, err := c.readFrom(b)
if err != nil {
err = &OpError{Op: "read", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
}
if addr == nil {
return n, nil, err
}
return n, addr, err
}
/ ReadMsgIP reads a message from c, copying the payload into b and
/ the associated out-of-band data into oob. It returns the number of
/ bytes copied into b, the number of bytes copied into oob, the flags
/ that were set on the message and the source address of the message.
/
/ The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be
/ used to manipulate IP-level socket options in oob.
func (c *IPConn) ReadMsgIP(b, oob []byte) (n, oobn, flags int, addr *IPAddr, err error) {
if !c.ok() {
return 0, 0, 0, nil, syscall.EINVAL
}
n, oobn, flags, addr, err = c.readMsg(b, oob)
if err != nil {
err = &OpError{Op: "read", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
}
return
}
/ WriteToIP acts like WriteTo but takes an IPAddr.
func (c *IPConn) WriteToIP(b []byte, addr *IPAddr) (int, error) {
if !c.ok() {
return 0, syscall.EINVAL
}
n, err := c.writeTo(b, addr)
if err != nil {
err = &OpError{Op: "write", Net: c.fd.net, Source: c.fd.laddr, Addr: addr.opAddr(), Err: err}
}
return n, err
}
/ WriteTo implements the PacketConn WriteTo method.
func (c *IPConn) WriteTo(b []byte, addr Addr) (int, error) {
if !c.ok() {
return 0, syscall.EINVAL
}
a, ok := addr.(*IPAddr)
if !ok {
return 0, &OpError{Op: "write", Net: c.fd.net, Source: c.fd.laddr, Addr: addr, Err: syscall.EINVAL}
}
n, err := c.writeTo(b, a)
if err != nil {
err = &OpError{Op: "write", Net: c.fd.net, Source: c.fd.laddr, Addr: a.opAddr(), Err: err}
}
return n, err
}
/ WriteMsgIP writes a message to addr via c, copying the payload from
/ b and the associated out-of-band data from oob. It returns the
/ number of payload and out-of-band bytes written.
/
/ The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be
/ used to manipulate IP-level socket options in oob.
func (c *IPConn) WriteMsgIP(b, oob []byte, addr *IPAddr) (n, oobn int, err error) {
if !c.ok() {
return 0, 0, syscall.EINVAL
}
n, oobn, err = c.writeMsg(b, oob, addr)
if err != nil {
err = &OpError{Op: "write", Net: c.fd.net, Source: c.fd.laddr, Addr: addr.opAddr(), Err: err}
}
return
}
func newIPConn(fd *netFD) *IPConn { return &IPConn{conn{fd}} }
/ DialIP acts like Dial for IP networks.
/
/ The network must be an IP network name; see func Dial for details.
/
/ If laddr is nil, a local address is automatically chosen.
/ If the IP field of raddr is nil or an unspecified IP address, the
/ local system is assumed.
func DialIP(network string, laddr, raddr *IPAddr) (*IPConn, error) {
if raddr == nil {
return nil, &OpError{Op: "dial", Net: network, Source: laddr.opAddr(), Addr: nil, Err: errMissingAddress}
}
sd := &sysDialer{network: network, address: raddr.String()}
c, err := sd.dialIP(context.Background(), laddr, raddr)
if err != nil {
return nil, &OpError{Op: "dial", Net: network, Source: laddr.opAddr(), Addr: raddr.opAddr(), Err: err}
}
return c, nil
}
/ ListenIP acts like ListenPacket for IP networks.
/
/ The network must be an IP network name; see func Dial for details.
/
/ If the IP field of laddr is nil or an unspecified IP address,
/ ListenIP listens on all available IP addresses of the local system
/ except multicast IP addresses.
func ListenIP(network string, laddr *IPAddr) (*IPConn, error) {
if laddr == nil {
laddr = &IPAddr{}
}
sl := &sysListener{network: network, address: laddr.String()}
c, err := sl.listenIP(context.Background(), laddr)
if err != nil {
return nil, &OpError{Op: "listen", Net: network, Source: nil, Addr: laddr.opAddr(), Err: err}
}
return c, nil
}