harmony 鸿蒙@ohos.geolocation (Geolocation)

2022-08-09
浏览 (707)

@ohos.geolocation (Geolocation)

The geolocation module provides a wide array of location services, including GNSS positioning, network positioning, geocoding, reverse geocoding, and geofencing.

NOTE The initial APIs of this module are supported since API version 7. Newly added APIs will be marked with a superscript to indicate their earliest API version. The APIs provided by this module are no longer maintained since API version 9. You are advised to use geoLocationManager.

Applying for Permissions

Before using basic location capabilities, check whether your application has been granted the permission to access the device location information. If not, your application needs to obtain the permission from the user as described below.

The system provides the following location permissions: - ohos.permission.LOCATION

ohos.permission.APPROXIMATELY_LOCATION
ohos.permission.LOCATION_IN_BACKGROUND

If your application needs to access the device location information, it must first apply for required permissions. Specifically speaking:

API versions earlier than 9: Apply for ohos.permission.LOCATION.

API version 9 and later: Apply for ohos.permission.APPROXIMATELY_LOCATION, or apply for ohos.permission.APPROXIMATELY_LOCATION and ohos.permission.LOCATION. Note that ohos.permission.LOCATION cannot be applied for separately.

API Version	Location Permission	Permission Application Result	Location Accuracy
Earlier than 9	ohos.permission.LOCATION	Successful	Location accurate to meters.
9 and later	ohos.permission.LOCATION	Failed	No location obtained.
9 and later	ohos.permission.APPROXIMATELY_LOCATION	Successful	Location accurate to 5 kilometers.
9 and later	ohos.permission.APPROXIMATELY_LOCATION and ohos.permission.LOCATION	Successful	Location accurate to meters.

If your application needs to access the device location information when running in the background, it must be configured to be able to run in the background and be granted the ohos.permission.LOCATION_IN_BACKGROUND permission. In this way, the system continues to report device location information after your application moves to the background.

You can declare the required permission in your application’s configuration file. For details, see Access Control (Permission) Development.

Modules to Import

import geolocation from '@ohos.geolocation';

geolocation.on(‘locationChange’)^(deprecated)

on(type: ‘locationChange’, request: LocationRequest, callback: Callback<Location>): void

Registers a listener for location changes with a location request initiated.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.on(‘locationChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value locationChange indicates a location change event.
request	LocationRequest	Yes	Location request.
callback	Callback<Location>	Yes	Callback used to receive the location change event.

Example

  import geolocation from '@ohos.geolocation';
  let requestInfo:geolocation.LocationRequest = {'priority': 0x203, 'scenario': 0x300, 'timeInterval': 0, 'distanceInterval': 0, 'maxAccuracy': 0};
  let locationChange = (location:geolocation.Location):void => {
      console.log('locationChanger: data: ' + JSON.stringify(location));
  };
  geolocation.on('locationChange', requestInfo, locationChange);

geolocation.off(‘locationChange’)^(deprecated)

off(type: ‘locationChange’, callback?: Callback<Location>): void

Unregisters the listener for location changes with the corresponding location request deleted.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.off(‘locationChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value locationChange indicates a location change event.
callback	Callback<Location>	No	Callback to unregister. If this parameter is not specified, all callbacks of the specified event type are unregistered.

Example

  import geolocation from '@ohos.geolocation';
  let requestInfo:geolocation.LocationRequest = {'priority': 0x203, 'scenario': 0x300, 'timeInterval': 0, 'distanceInterval': 0, 'maxAccuracy': 0};
  let locationChange = (location:geolocation.Location):void => {
      console.log('locationChanger: data: ' + JSON.stringify(location));
  };
  geolocation.on('locationChange', requestInfo, locationChange);
  geolocation.off('locationChange', locationChange);

geolocation.on(‘locationServiceState’)^(deprecated)

on(type: ‘locationServiceState’, callback: Callback<boolean>): void

Registers a listener for location service status change events.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.on(‘locationEnabledChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value locationServiceState indicates a location service status change event.
callback	Callback<boolean>	Yes	Callback used to receive the location service status change event.

Example

  import geolocation from '@ohos.geolocation';
  let locationServiceState = (state:boolean):void => {
      console.log('locationServiceState: ' + JSON.stringify(state));
  }
  geolocation.on('locationServiceState', locationServiceState);

geolocation.off(‘locationServiceState’)^(deprecated)

off(type: ‘locationServiceState’, callback?: Callback<boolean>): void;

Unregisters the listener for location service status change events.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.off(‘locationEnabledChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value locationServiceState indicates a location service status change event.
callback	Callback<boolean>	No	Callback to unregister. If this parameter is not specified, all callbacks of the specified event type are unregistered.

Example

  import geolocation from '@ohos.geolocation';
  let locationServiceState = (state:boolean):void => {
      console.log('locationServiceState: state: ' + JSON.stringify(state));
  }
  geolocation.on('locationServiceState', locationServiceState);
  geolocation.off('locationServiceState', locationServiceState);

geolocation.on(‘cachedGnssLocationsReporting’)^(deprecated)

on(type: ‘cachedGnssLocationsReporting’, request: CachedGnssLocationsRequest, callback: Callback<Array<Location>>): void;

Registers a listener for cached GNSS location reports.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.on(‘cachedGnssLocationsChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value cachedGnssLocationsReporting indicates reporting of cached GNSS locations.
request	CachedGnssLocationsRequest	Yes	Request for reporting cached GNSS location.
callback	Callback<Array<Location>>	Yes	Callback used to receive the cached GNSS locations.

Example

  import geolocation from '@ohos.geolocation';
  let cachedLocationsCb = (locations:Array<geolocation.Location>):void => {
      console.log('cachedGnssLocationsReporting: locations: ' + JSON.stringify(locations));
  }
  let requestInfo:geolocation.CachedGnssLocationsRequest = {'reportingPeriodSec': 10, 'wakeUpCacheQueueFull': true};
  geolocation.on('cachedGnssLocationsReporting', requestInfo, cachedLocationsCb);

geolocation.off(‘cachedGnssLocationsReporting’)^(deprecated)

off(type: ‘cachedGnssLocationsReporting’, callback?: Callback<Array<Location>>): void;

Unregisters the listener for cached GNSS location reports.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.off(‘cachedGnssLocationsChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value cachedGnssLocationsReporting indicates reporting of cached GNSS locations.
callback	Callback<Array<Location>>	No	Callback to unregister. If this parameter is not specified, all callbacks of the specified event type are unregistered.

Example

  import geolocation from '@ohos.geolocation';
  let cachedLocationsCb = (locations:Array<geolocation.Location>):void => {
      console.log('cachedGnssLocationsReporting: locations: ' + JSON.stringify(locations));
  }
  let requestInfo:geolocation.CachedGnssLocationsRequest = {'reportingPeriodSec': 10, 'wakeUpCacheQueueFull': true};
  geolocation.on('cachedGnssLocationsReporting', requestInfo, cachedLocationsCb);
  geolocation.off('cachedGnssLocationsReporting');

geolocation.on(‘gnssStatusChange’)^(deprecated)

on(type: ‘gnssStatusChange’, callback: Callback<SatelliteStatusInfo>): void;

Registers a listener for GNSS satellite status change events.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.on(‘satelliteStatusChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value gnssStatusChange indicates a GNSS satellite status change.
callback	Callback<SatelliteStatusInfo>	Yes	Callback used to receive GNSS satellite status changes.

Example

  import geolocation from '@ohos.geolocation';
  let gnssStatusCb = (satelliteStatusInfo:geolocation.SatelliteStatusInfo):void => {
      console.log('gnssStatusChange: ' + JSON.stringify(satelliteStatusInfo));
  }
  geolocation.on('gnssStatusChange', gnssStatusCb);

geolocation.off(‘gnssStatusChange’)^(deprecated)

off(type: ‘gnssStatusChange’, callback?: Callback<SatelliteStatusInfo>): void;

Unregisters the listener for GNSS satellite status change events.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.off(‘satelliteStatusChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value gnssStatusChange indicates a GNSS satellite status change.
callback	Callback<SatelliteStatusInfo>	No	Callback to unregister. If this parameter is not specified, all callbacks of the specified event type are unregistered.

Example

  import geolocation from '@ohos.geolocation';
  let gnssStatusCb = (satelliteStatusInfo:geolocation.SatelliteStatusInfo) => {
      console.log('gnssStatusChange: ' + JSON.stringify(satelliteStatusInfo));
  }
  geolocation.on('gnssStatusChange', gnssStatusCb);
  geolocation.off('gnssStatusChange', gnssStatusCb);

geolocation.on(‘nmeaMessageChange’)^(deprecated)

on(type: ‘nmeaMessageChange’, callback: Callback<string>): void;

Registers a listener for GNSS NMEA message change events.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.on(‘nmeaMessage’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value nmeaMessageChange indicates a GNSS NMEA message change.
callback	Callback<string>	Yes	Callback used to receive GNSS NMEA message changes.

Example

  import geolocation from '@ohos.geolocation';
  let nmeaCb = (str:string):void => {
      console.log('nmeaMessageChange: ' + JSON.stringify(str));
  }
  geolocation.on('nmeaMessageChange', nmeaCb );

geolocation.off(‘nmeaMessageChange’)^(deprecated)

off(type: ‘nmeaMessageChange’, callback?: Callback<string>): void;

Unregisters the listener for GNSS NMEA message change events.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.off(‘nmeaMessage’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value nmeaMessageChange indicates a GNSS NMEA message change.
callback	Callback<string>	No	Callback to unregister. If this parameter is not specified, all callbacks of the specified event type are unregistered.

Example

  import geolocation from '@ohos.geolocation';
  let nmeaCb = (str:string):void => {
      console.log('nmeaMessageChange: ' + JSON.stringify(str));
  }
  geolocation.on('nmeaMessageChange', nmeaCb);
  geolocation.off('nmeaMessageChange', nmeaCb);

geolocation.on(‘fenceStatusChange’)^(deprecated)

on(type: ‘fenceStatusChange’, request: GeofenceRequest, want: WantAgent): void;

Registers a listener for status change events of the specified geofence.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.on(‘gnssFenceStatusChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geofence

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value fenceStatusChange indicates a geofence status change.
request	GeofenceRequest	Yes	Geofencing request.
want	WantAgent	Yes	WantAgent used to receive geofence (entrance or exit) events.

Example

  import geolocation from '@ohos.geolocation';
  import wantAgent from '@ohos.app.ability.wantAgent';
  
  let wantAgentInfo:wantAgent.WantAgentInfo = {
      wants: [
          {
              bundleName: "com.example.myapplication",
              abilityName: "EntryAbility",
              action: "action1"
          }
      ],
      operationType: wantAgent.OperationType.START_ABILITY,
      requestCode: 0,
      wantAgentFlags: [wantAgent.WantAgentFlags.UPDATE_PRESENT_FLAG],
  };
  
  wantAgent.getWantAgent(wantAgentInfo).then((wantAgentObj) => {
    let requestInfo:geolocation.GeofenceRequest = {'priority': 0x201, 'scenario': 0x301, "geofence": {"latitude": 121, "longitude": 26, "radius": 100, "expiration": 10000}};
    geolocation.on('fenceStatusChange', requestInfo, wantAgentObj);
  });

geolocation.off(‘fenceStatusChange’)^(deprecated)

off(type: ‘fenceStatusChange’, request: GeofenceRequest, want: WantAgent): void;

Unregisters the listener for status change events of the specified geofence.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.off(‘gnssFenceStatusChange’).

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geofence

Parameters

Name	Type	Mandatory	Description
type	string	Yes	Event type. The value fenceStatusChange indicates a geofence status change.
request	GeofenceRequest	Yes	Geofencing request.
want	WantAgent	Yes	WantAgent used to receive geofence (entrance or exit) events.

Example

  import geolocation from '@ohos.geolocation';
  import wantAgent from '@ohos.app.ability.wantAgent';
  
  let wantAgentInfo:wantAgent.WantAgentInfo = {
      wants: [
          {
              bundleName: "com.example.myapplication",
              abilityName: "EntryAbility",
              action: "action1",
          }
      ],
      operationType: wantAgent.OperationType.START_ABILITY,
      requestCode: 0,
      wantAgentFlags: [wantAgent.WantAgentFlags.UPDATE_PRESENT_FLAG]
  };
  
  wantAgent.getWantAgent(wantAgentInfo).then((wantAgentObj) => {
    let requestInfo:geolocation.GeofenceRequest = {'priority': 0x201, 'scenario': 0x301, "geofence": {"latitude": 121, "longitude": 26, "radius": 100, "expiration": 10000}};
    geolocation.on('fenceStatusChange', requestInfo, wantAgentObj);
    geolocation.off('fenceStatusChange', requestInfo, wantAgentObj);
  });

geolocation.getCurrentLocation^(deprecated)

getCurrentLocation(request: CurrentLocationRequest, callback: AsyncCallback<Location>): void

Obtains the current location. This API uses an asynchronous callback to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getCurrentLocation.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
request	CurrentLocationRequest	Yes	Location request.
callback	AsyncCallback<Location>	Yes	Callback used to receive the current location.

Example

  import geolocation from '@ohos.geolocation';
  import BusinessError from "@ohos.base"
  let requestInfo:geolocation.CurrentLocationRequest = {'priority': 0x203, 'scenario': 0x300,'maxAccuracy': 0};
  let locationChange = (err:BusinessError.BusinessError, location:geolocation.Location) => {
      if (err) {
          console.log('locationChanger: err=' + JSON.stringify(err));
      }
      if (location) {
          console.log('locationChanger: location=' + JSON.stringify(location));
      }
  };
  geolocation.getCurrentLocation(requestInfo, locationChange);

geolocation.getCurrentLocation^(deprecated)

getCurrentLocation(callback: AsyncCallback<Location>): void

Obtains the current location. This API uses an asynchronous callback to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getCurrentLocation.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
callback	AsyncCallback<Location>	Yes	Callback used to receive the current location.

Example

  import geolocation from '@ohos.geolocation';
  import BusinessError from "@ohos.base"
  let locationChange = (err:BusinessError.BusinessError, location:geolocation.Location):void => {
      if (err) {
          console.log('locationChanger: err=' + JSON.stringify(err));
      }
      if (location) {
          console.log('locationChanger: location=' + JSON.stringify(location));
      }
  };
  geolocation.getCurrentLocation(locationChange);

geolocation.getCurrentLocation^(deprecated)

getCurrentLocation(request?: CurrentLocationRequest): Promise<Location>

Obtains the current location. This API uses a promise to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getCurrentLocation.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
request	CurrentLocationRequest	No	Location request.

Return value

Name	Type	Mandatory	Description
Promise<Location>	Location	NA	Promise used to return the current location.

Example

  import geolocation from '@ohos.geolocation';
  let requestInfo:geolocation.CurrentLocationRequest = {'priority': 0x203, 'scenario': 0x300,'maxAccuracy': 0};
  geolocation.getCurrentLocation(requestInfo).then((result) => {
      console.log('current location: ' + JSON.stringify(result));
  });

geolocation.getLastLocation^(deprecated)

getLastLocation(callback: AsyncCallback<Location>): void

Obtains the previous location. This API uses an asynchronous callback to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getLastLocation.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
callback	AsyncCallback<Location>	Yes	Callback used to receive the previous location.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.getLastLocation((err, data) => {
      if (err) {
          console.log('getLastLocation: err=' + JSON.stringify(err));
      }
      if (data) {
          console.log('getLastLocation: data=' + JSON.stringify(data));
      }
  });

geolocation.getLastLocation^(deprecated)

getLastLocation(): Promise<Location>

Obtains the previous location. This API uses a promise to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getLastLocation.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Return value

Name	Type	Mandatory	Description
Promise<Location>	Location	NA	Promise used to return the previous location.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.getLastLocation().then((result) => {
      console.log('getLastLocation: result: ' + JSON.stringify(result));
  });

geolocation.isLocationEnabled^(deprecated)

isLocationEnabled(callback: AsyncCallback<boolean>): void

Checks whether the location service is enabled. This API uses an asynchronous callback to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.isLocationEnabled.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
callback	AsyncCallback<boolean>	Yes	Callback used to receive the location service status.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.isLocationEnabled((err, data) => {
      if (err) {
          console.log('isLocationEnabled: err=' + JSON.stringify(err));
      }
      if (data) {
          console.log('isLocationEnabled: data=' + JSON.stringify(data));
      }
  });

geolocation.isLocationEnabled^(deprecated)

isLocationEnabled(): Promise<boolean>

Checks whether the location service is enabled. This API uses a promise to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.isLocationEnabled.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Return value

Name	Type	Mandatory	Description
Promise<boolean>	boolean	NA	Promise used to return the location service status.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.isLocationEnabled().then((result) => {
      console.log('promise, isLocationEnabled: ' + JSON.stringify(result));
  });

geolocation.requestEnableLocation^(deprecated)

requestEnableLocation(callback: AsyncCallback<boolean>): void

Requests to enable the location service. This API uses an asynchronous callback to return the result.

NOTE
This API has been discarded since API version 9. It is recommended that a dialog box be displayed in the application to request the user to go to Settings to enable the location function and specify the scenarios in which the location information will be used in the dialog box.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
callback	AsyncCallback<boolean>	Yes	Callback used to receive the location service status.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.requestEnableLocation((err, data) => {
      if (err) {
          console.log('requestEnableLocation: err=' + JSON.stringify(err));
      }
      if (data) {
          console.log('requestEnableLocation: data=' + JSON.stringify(data));
      }
  });

geolocation.requestEnableLocation^(deprecated)

requestEnableLocation(): Promise<boolean>

Requests to enable the location service. This API uses a promise to return the result.

NOTE
This API has been discarded since API version 9. It is recommended that a dialog box be displayed in the application to request the user to go to Settings to enable the location function and specify the scenarios in which the location information will be used in the dialog box.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Return value

Name	Type	Mandatory	Description
Promise<boolean>	boolean	NA	Promise used to return the location service status.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.requestEnableLocation().then((result) => {
      console.log('promise, requestEnableLocation: ' + JSON.stringify(result));
  });

geolocation.isGeoServiceAvailable^(deprecated)

isGeoServiceAvailable(callback: AsyncCallback<boolean>): void

Checks whether the (reverse) geocoding service is available. This API uses an asynchronous callback to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.isGeocoderAvailable.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Parameters

Name	Type	Mandatory	Description
callback	AsyncCallback<boolean>	Yes	Callback used to receive the (reverse) geocoding service status.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.isGeoServiceAvailable((err, data) => {
      if (err) {
          console.log('isGeoServiceAvailable: err=' + JSON.stringify(err));
      }
      if (data) {
          console.log('isGeoServiceAvailable: data=' + JSON.stringify(data));
      }
  });

geolocation.isGeoServiceAvailable^(deprecated)

isGeoServiceAvailable(): Promise<boolean>

Checks whether the (reverse) geocoding service is available. This API uses a promise to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.isGeocoderAvailable.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Return value

Name	Type	Mandatory	Description
Promise<boolean>	boolean	NA	Promise used to return the (reverse) geocoding service status.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.isGeoServiceAvailable().then((result) => {
      console.log('promise, isGeoServiceAvailable: ' + JSON.stringify(result));
  });

geolocation.getAddressesFromLocation^(deprecated)

getAddressesFromLocation(request: ReverseGeoCodeRequest, callback: AsyncCallback<Array<GeoAddress>>): void

Converts coordinates into geographic descriptions through reverse geocoding. This API uses an asynchronous callback to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getAddressesFromLocation.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Parameters

Name	Type	Mandatory	Description
request	ReverseGeoCodeRequest	Yes	Reverse geocoding request.
callback	AsyncCallback<Array<GeoAddress>>	Yes	Callback used to receive the reverse geocoding result.

Example

  import geolocation from '@ohos.geolocation';
  let reverseGeocodeRequest:geolocation.ReverseGeoCodeRequest = {"latitude": 31.12, "longitude": 121.11, "maxItems": 1};
  geolocation.getAddressesFromLocation(reverseGeocodeRequest, (err, data) => {
      if (err) {
          console.log('getAddressesFromLocation: err=' + JSON.stringify(err));
      }
      if (data) {
          console.log('getAddressesFromLocation: data=' + JSON.stringify(data));
      }
  });

geolocation.getAddressesFromLocation^(deprecated)

getAddressesFromLocation(request: ReverseGeoCodeRequest): Promise<Array<GeoAddress>>;

Converts coordinates into geographic descriptions through reverse geocoding. This API uses a promise to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getAddressesFromLocation.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Parameters

Name	Type	Mandatory	Description
request	ReverseGeoCodeRequest	Yes	Reverse geocoding request.

Return value

Name	Type	Mandatory	Description
Promise<Array<GeoAddress>>	Array<GeoAddress>	NA	Promise used to return the reverse geocoding result.

Example

  import geolocation from '@ohos.geolocation';
  let reverseGeocodeRequest:geolocation.ReverseGeoCodeRequest = {"latitude": 31.12, "longitude": 121.11, "maxItems": 1};
  geolocation.getAddressesFromLocation(reverseGeocodeRequest).then((data) => {
      console.log('getAddressesFromLocation: ' + JSON.stringify(data));
  });

geolocation.getAddressesFromLocationName^(deprecated)

getAddressesFromLocationName(request: GeoCodeRequest, callback: AsyncCallback<Array<GeoAddress>>): void

Converts geographic descriptions into coordinates through geocoding. This API uses an asynchronous callback to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getAddressesFromLocationName.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Parameters

Name	Type	Mandatory	Description
request	GeoCodeRequest	Yes	Geocoding request.
callback	AsyncCallback<Array<GeoAddress>>	Yes	Callback used to receive the geocoding result.

Example

  import geolocation from '@ohos.geolocation';
  let geocodeRequest:geolocation.GeoCodeRequest = {"description": "No. xx, xx Road, Pudong District, Shanghai", "maxItems": 1};
  geolocation.getAddressesFromLocationName(geocodeRequest, (err, data) => {
      if (err) {
          console.log('getAddressesFromLocationName: err=' + JSON.stringify(err));
      }
      if (data) {
          console.log('getAddressesFromLocationName: data=' + JSON.stringify(data));
      }
  });

geolocation.getAddressesFromLocationName^(deprecated)

getAddressesFromLocationName(request: GeoCodeRequest): Promise<Array<GeoAddress>>

Converts geographic descriptions into coordinates through geocoding. This API uses a promise to return the result.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.getAddressesFromLocationName.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Parameters

Name	Type	Mandatory	Description
request	GeoCodeRequest	Yes	Geocoding request.

Return value

Name	Type	Mandatory	Description
Promise<Array<GeoAddress>>	Array<GeoAddress>	NA	Promise used to receive the geocoding result.

Example

  import geolocation from '@ohos.geolocation';
  let geocodeRequest:geolocation.GeoCodeRequest = {"description": "No. xx, xx Road, Pudong District, Shanghai", "maxItems": 1};
  geolocation.getAddressesFromLocationName(geocodeRequest).then((result) => {
      console.log('getAddressesFromLocationName: ' + JSON.stringify(result));
  });

geolocation.getCachedGnssLocationsSize^(deprecated)

getCachedGnssLocationsSize(callback: AsyncCallback<number>): void;

Obtains the number of cached GNSS locations.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.getCachedGnssLocationsSize.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Parameters

Name	Type	Mandatory	Description
callback	AsyncCallback<number>	Yes	Callback used to receive the number of cached GNSS locations.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.getCachedGnssLocationsSize((err, size) => {
      if (err) {
          console.log('getCachedGnssLocationsSize: err=' + JSON.stringify(err));
      }
      if (size) {
          console.log('getCachedGnssLocationsSize: size=' + JSON.stringify(size));
      }
  });

geolocation.getCachedGnssLocationsSize^(deprecated)

getCachedGnssLocationsSize(): Promise<number>;

Obtains the number of cached GNSS locations.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.getCachedGnssLocationsSize.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Return value

Name	Type	Mandatory	Description
Promise<number>	number	NA	Promise used to return the number of cached GNSS locations.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.getCachedGnssLocationsSize().then((result) => {
      console.log('promise, getCachedGnssLocationsSize: ' + JSON.stringify(result));
  });

geolocation.flushCachedGnssLocations^(deprecated)

flushCachedGnssLocations(callback: AsyncCallback<boolean>): void;

Obtains all cached GNSS locations and clears the GNSS cache queue.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.flushCachedGnssLocations.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Parameters

Name	Type	Mandatory	Description
callback	AsyncCallback<boolean>	Yes	Callback used to receive the operation result.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.flushCachedGnssLocations((err, result) => {
      if (err) {
          console.log('flushCachedGnssLocations: err=' + JSON.stringify(err));
      }
      if (result) {
          console.log('flushCachedGnssLocations: result=' + JSON.stringify(result));
      }
  });

geolocation.flushCachedGnssLocations^(deprecated)

flushCachedGnssLocations(): Promise<boolean>;

Obtains all cached GNSS locations and clears the GNSS cache queue.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.flushCachedGnssLocations.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Return value

Name	Type	Mandatory	Description
Promise<boolean>	boolean	NA	Promise used to indicate whether the cached GNSS locations are cleared successfully.

Example

  import geolocation from '@ohos.geolocation';
  geolocation.flushCachedGnssLocations().then((result) => {
      console.log('promise, flushCachedGnssLocations: ' + JSON.stringify(result));
  });

geolocation.sendCommand^(deprecated)

sendCommand(command: LocationCommand, callback: AsyncCallback<boolean>): void;

Sends an extended command to the location subsystem.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.sendCommand.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
command	LocationCommand	Yes	Extended command (string) to be sent.
callback	AsyncCallback<boolean>	Yes	Callback used to receive the operation result.

Example

  import geolocation from '@ohos.geolocation';
  let requestInfo:geolocation.LocationCommand = {'scenario': 0x301, 'command': "command_1"};
  geolocation.sendCommand(requestInfo, (err, result) => {
      if (err) {
          console.log('sendCommand: err=' + JSON.stringify(err));
      }
      if (result) {
          console.log('sendCommand: result=' + JSON.stringify(result));
      }
  });

geolocation.sendCommand^(deprecated)

sendCommand(command: LocationCommand): Promise<boolean>;

Sends an extended command to the location subsystem.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.sendCommand.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Parameters

Name	Type	Mandatory	Description
command	LocationCommand	Yes	Extended command (string) to be sent.

Return value

Name	Type	Mandatory	Description
Promise<boolean>	boolean	NA	Callback used to return the operation result.

Example

  import geolocation from '@ohos.geolocation';
  let requestInfo:geolocation.LocationCommand = {'scenario': 0x301, 'command': "command_1"};
  geolocation.sendCommand(requestInfo).then((result) => {
      console.log('promise, sendCommand: ' + JSON.stringify(result));
  });

ReverseGeoCodeRequest^(deprecated)

Defines a reverse geocoding request.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.ReverseGeoCodeRequest.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Name	Type	Readable	Writable	Description
locale	string	Yes	Yes	Language used for the location description. zh indicates Chinese, and en indicates English.
latitude	number	Yes	Yes	Latitude information. A positive value indicates north latitude, and a negative value indicates south latitude. The value ranges from -90 to 90.
longitude	number	Yes	Yes	Longitude information. A positive value indicates east longitude , and a negative value indicates west longitude . The value ranges from -180 to 180.
maxItems	number	Yes	Yes	Maximum number of location records to be returned. The value must be greater than or equal to 0. A value smaller than 10 is recommended.

GeoCodeRequest^(deprecated)

Defines a geocoding request.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.GeoCodeRequest.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Name	Type	Readable	Writable	Description
locale	string	Yes	Yes	Language used for the location description. zh indicates Chinese, and en indicates English.
description	string	Yes	Yes	Location description, for example, No. xx, xx Road, Pudong New District, Shanghai.
maxItems	number	Yes	Yes	Maximum number of location records to be returned. The value must be greater than or equal to 0. A value smaller than 10 is recommended.
minLatitude	number	Yes	Yes	Minimum latitude. This parameter is used with minLongitude, maxLatitude, and maxLongitude to specify the latitude and longitude ranges. The value ranges from -90 to 90.
minLongitude	number	Yes	Yes	Minimum longitude. The value ranges from -180 to 180.
maxLatitude	number	Yes	Yes	Maximum latitude. The value ranges from -90 to 90.
maxLongitude	number	Yes	Yes	Maximum longitude. The value ranges from -180 to 180.

GeoAddress^(deprecated)

Defines a geographic location.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.GeoAddress.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geocoder

Name	Type	Readable	Writable	Description
latitude⁷⁺	number	Yes	No	Latitude information. A positive value indicates north latitude, and a negative value indicates south latitude. The value ranges from -90 to 90.
longitude⁷⁺	number	Yes	No	Longitude information. A positive value indicates east longitude , and a negative value indicates west longitude . The value ranges from -180 to 180.
locale⁷⁺	string	Yes	No	Language used for the location description. zh indicates Chinese, and en indicates English.
placeName⁷⁺	string	Yes	No	Landmark of the location.
countryCode⁷⁺	string	Yes	No	Country code.
countryName⁷⁺	string	Yes	No	Country name.
administrativeArea⁷⁺	string	Yes	No	Administrative region name.
subAdministrativeArea⁷⁺	string	Yes	No	Sub-administrative region name.
locality⁷⁺	string	Yes	No	Locality information.
subLocality⁷⁺	string	Yes	No	Sub-locality information.
roadName⁷⁺	string	Yes	No	Road name.
subRoadName⁷⁺	string	Yes	No	Auxiliary road information.
premises⁷⁺	string	Yes	No	House information.
postalCode⁷⁺	string	Yes	No	Postal code.
phoneNumber⁷⁺	string	Yes	No	Phone number.
addressUrl⁷⁺	string	Yes	No	Website URL.
descriptions⁷⁺	Array<string>	Yes	No	Additional descriptions.
descriptionsSize⁷⁺	number	Yes	No	Total number of additional descriptions. The value must be greater than or equal to 0. A value smaller than 10 is recommended.

LocationRequest^(deprecated)

Defines a location request.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.LocationRequest.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Name	Type	Readable	Writable	Description
priority	LocationRequestPriority	Yes	Yes	Priority of the location request. For details about the value range, see LocationRequestPriority.
scenario	LocationRequestScenario	Yes	Yes	Scenario of the location request. For details about the value range, see LocationRequestScenario.
timeInterval	number	Yes	Yes	Time interval at which location information is reported, in seconds. The value must be greater than 0.
distanceInterval	number	Yes	Yes	Distance interval at which location information is reported. The value must be greater than 0, in meters.
maxAccuracy	number	Yes	Yes	Location accuracy. This parameter is valid only when the precise location function is enabled, and is invalid when the approximate location function is enabled. The value must be greater than 0.

CurrentLocationRequest^(deprecated)

Defines the current location request.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.CurrentLocationRequest.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Name	Type	Readable	Writable	Description
priority	LocationRequestPriority	Yes	Yes	Priority of the location request. For details about the value range, see LocationRequestPriority.
scenario	LocationRequestScenario	Yes	Yes	Scenario of the location request. For details about the value range, see LocationRequestScenario.
maxAccuracy	number	Yes	Yes	Location accuracy, in meters. This parameter is valid only when the precise location function is enabled, and is invalid when the approximate location function is enabled. The value must be greater than 0.
timeoutMs	number	Yes	Yes	Timeout duration, in milliseconds. The minimum value is 1000. The value must be greater than or equal to 1000.

SatelliteStatusInfo^(deprecated)

Defines the satellite status information.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.SatelliteStatusInfo.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Name	Type	Readable	Writable	Description
satellitesNumber	number	Yes	No	Number of satellites. The value must be greater than or equal to 0.
satelliteIds	Array<number>	Yes	No	Array of satellite IDs. The value must be greater than or equal to 0.
carrierToNoiseDensitys	Array<number>	Yes	No	Carrier-to-noise density ratio, that is, cn0. The value must be greater than 0.
altitudes	Array<number>	Yes	No	Satellite altitude angle information. The value ranges from -90 to 90, in degrees.
azimuths	Array<number>	Yes	No	Azimuth information. The value ranges from 0 to 360, in degrees.
carrierFrequencies	Array<number>	Yes	No	Carrier frequency. The value must be greater than or equal to 0, in Hz.

CachedGnssLocationsRequest^(deprecated)

Represents a request for reporting cached GNSS locations.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.CachedGnssLocationsRequest.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Gnss

Name	Type	Readable	Writable	Description
reportingPeriodSec	number	Yes	Yes	Interval for reporting the cached GNSS locations, in milliseconds. The value must be greater than 0.
wakeUpCacheQueueFull	boolean	Yes	Yes	true: reports the cached GNSS locations to the application when the cache queue is full. false: discards the cached GNSS locations when the cache queue is full.

Geofence^(deprecated)

Defines a GNSS geofence. Currently, only circular geofences are supported.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.Geofence.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geofence

Name	Type	Readable	Writable	Description
latitude	number	Yes	Yes	Latitude information. The value ranges from -90 to 90.
longitude	number	Yes	Yes	Longitude information. The value ranges from -180 to 180.
radius	number	Yes	Yes	Radius of a circular geofence. The value must be greater than 0, in meters.
expiration	number	Yes	Yes	Expiration period of a geofence, in milliseconds. The value must be greater than 0.

GeofenceRequest^(deprecated)

Represents a GNSS geofencing request.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.GeofenceRequest.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Geofence

Name	Type	Readable	Writable	Description
priority	LocationRequestPriority	Yes	Yes	Priority of the location information.
scenario	LocationRequestScenario	Yes	Yes	Location scenario.
geofence	Geofence	Yes	Yes	Geofence information.

LocationCommand^(deprecated)

Defines an extended command.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.LocationCommand.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Name	Type	Readable	Writable	Description
scenario	LocationRequestScenario	Yes	Yes	Location scenario.
command	string	Yes	Yes	Extended command, in the string format.

Location^(deprecated)

Defines a location.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.Location.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Name	Type	Readable	Writable	Description
latitude⁷⁺	number	Yes	No	Latitude information. A positive value indicates north latitude, and a negative value indicates south latitude. The value ranges from -90 to 90.
longitude⁷⁺	number	Yes	No	Longitude information. A positive value indicates east longitude , and a negative value indicates west longitude . The value ranges from -180 to 180.
altitude⁷⁺	number	Yes	No	Location altitude, in meters.
accuracy⁷⁺	number	Yes	No	Location accuracy, in meters.
speed⁷⁺	number	Yes	No	Speed, in m/s.
timeStamp⁷⁺	number	Yes	No	Location timestamp in the UTC format.
direction⁷⁺	number	Yes	No	Direction information. The value ranges from 0 to 360, in degrees.
timeSinceBoot⁷⁺	number	Yes	No	Location timestamp since boot.
additions⁷⁺	Array<string>	Yes	No	Additional description.
additionSize⁷⁺	number	Yes	No	Number of additional descriptions. The value must be greater than or equal to 0.

LocationPrivacyType^(deprecated)

Defines the privacy statement type.

NOTE
This API is supported since API version 8. This API is deprecated since API version 9. You are advised to use geoLocationManager.LocationPrivacyType.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Name	Value	Description
OTHERS	0	Other scenarios. Reserved field.
STARTUP	1	Privacy statement displayed in the startup wizard.
CORE_LOCATION	2	Privacy statement displayed when enabling the location service.

LocationRequestPriority^(deprecated)

Sets the priority of the location request.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.LocationRequestPriority.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Name	Value	Description
UNSET	0x200	Priority unspecified. If this option is used, LocationRequestPriority is invalid.
ACCURACY	0x201	Location accuracy preferred. This policy mainly uses the GNSS positioning technology. In an open area, the technology can achieve the meter-level location accuracy, depending on the hardware performance of the device. However, in a shielded environment, the location accuracy may significantly decrease.
LOW_POWER	0x202	Power efficiency preferred. This policy mainly uses the base station positioning, WLAN positioning, and Bluetooth positioning technologies to obtain device location in both indoor and outdoor scenarios. The location accuracy depends on the distribution of surrounding base stations, visible WLANs, and Bluetooth devices and therefore may fluctuate greatly. This policy is recommended and can reduce power consumption when your application does not require high location accuracy or when base stations, visible WLANs, and Bluetooth devices are densely distributed.
FIRST_FIX	0x203	Fast location preferred. Use this option if you want to obtain a location as fast as possible. This policy uses the GNSS positioning, base station positioning, WLAN positioning, and Bluetooth positioning technologies simultaneously to obtain the device location in both the indoor and outdoor scenarios. When all positioning technologies provide a location result, the system provides the most accurate location result for your application. It can lead to significant hardware resource consumption and power consumption.

LocationRequestScenario^(deprecated)

Sets the scenario of the location request.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.LocationRequestScenario.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Name	Value	Description
UNSET	0x300	Scenario unspecified. If this option is used, LocationRequestScenario is invalid.
NAVIGATION	0x301	Navigation scenario. This option is applicable when your application needs to obtain the real-time location of a mobile device outdoors, such as navigation for driving or walking. In this scenario, GNSS positioning is used to provide location services to ensure the optimal location accuracy of the system. The location result is reported at a minimum interval of 1 second by default.
TRAJECTORY_TRACKING	0x302	Trajectory tracking scenario. This option is applicable when your application needs to record user trajectories, for example, the track recording function of sports applications. In this scenario, the GNSS positioning technology is mainly used to ensure the location accuracy. The location result is reported at a minimum interval of 1 second by default.
CAR_HAILING	0x303	Ride hailing scenario. This option is applicable when your application needs to obtain the current location of a user who is hailing a taxi. The location result is reported at a minimum interval of 1 second by default.
DAILY_LIFE_SERVICE	0x304	Daily life service scenario. This option is applicable when your application only needs the approximate user location for recommendations and push notifications in scenarios such as when the user is browsing news, shopping online, and ordering food. The location result is reported at a minimum interval of 1 second by default.
NO_POWER	0x305	Power efficiency scenario. This option is applicable when your application does not proactively start the location service. When responding to another application requesting the same location service, the system marks a copy of the location result to your application. In this way, your application will not consume extra power for obtaining the user location.

GeoLocationErrorCode^(deprecated)

Enumerates error codes of the location service.

NOTE
This API is deprecated since API version 9. You are advised to use geoLocationManager.

Required permissions: ohos.permission.LOCATION

System capability: SystemCapability.Location.Location.Core

Name	Value	Description
INPUT_PARAMS_ERROR⁷⁺	101	Incorrect input parameters.
REVERSE_GEOCODE_ERROR⁷⁺	102	Failed to call the reverse geocoding API.
GEOCODE_ERROR⁷⁺	103	Failed to call the geocoding API.
LOCATOR_ERROR⁷⁺	104	Failed to obtain the location.
LOCATION_SWITCH_ERROR⁷⁺	105	Failed to change the location service switch.
LAST_KNOWN_LOCATION_ERROR⁷⁺	106	Failed to obtain the previous location.
LOCATION_REQUEST_TIMEOUT_ERROR⁷⁺	107	Failed to obtain the location within the specified time.

你可能感兴趣的鸿蒙文章

harmony 鸿蒙APIs

harmony 鸿蒙System Common Events (To Be Deprecated Soon)

harmony 鸿蒙System Common Events

harmony 鸿蒙API Reference Document Description

harmony 鸿蒙Enterprise Device Management Overview (for System Applications Only)

harmony 鸿蒙BundleStatusCallback

harmony 鸿蒙@ohos.bundle.innerBundleManager (innerBundleManager)

harmony 鸿蒙@ohos.distributedBundle (Distributed Bundle Management)

harmony 鸿蒙@ohos.bundle (Bundle)

harmony 鸿蒙@ohos.enterprise.EnterpriseAdminExtensionAbility (EnterpriseAdminExtensionAbility)

0 赞

所属分类： 后端技术
本文标签：
版权声明： 原创文章如转载，请注明本文链接: https://www.seaxiang.com/blog/4c70b79e6e824cb5a4275f5047bcc020

harmony 鸿蒙@ohos.geolocation (Geolocation)

@ohos.geolocation (Geolocation)

Applying for Permissions

Modules to Import

geolocation.on(‘locationChange’)(deprecated)

geolocation.off(‘locationChange’)(deprecated)

geolocation.on(‘locationServiceState’)(deprecated)

geolocation.off(‘locationServiceState’)(deprecated)

geolocation.on(‘cachedGnssLocationsReporting’)(deprecated)

geolocation.off(‘cachedGnssLocationsReporting’)(deprecated)

geolocation.on(‘gnssStatusChange’)(deprecated)

geolocation.off(‘gnssStatusChange’)(deprecated)

geolocation.on(‘nmeaMessageChange’)(deprecated)

geolocation.off(‘nmeaMessageChange’)(deprecated)

geolocation.on(‘fenceStatusChange’)(deprecated)

geolocation.off(‘fenceStatusChange’)(deprecated)

geolocation.getCurrentLocation(deprecated)

geolocation.getCurrentLocation(deprecated)

geolocation.getCurrentLocation(deprecated)

geolocation.getLastLocation(deprecated)

geolocation.getLastLocation(deprecated)

geolocation.isLocationEnabled(deprecated)

geolocation.isLocationEnabled(deprecated)

geolocation.requestEnableLocation(deprecated)

geolocation.requestEnableLocation(deprecated)

geolocation.isGeoServiceAvailable(deprecated)

geolocation.isGeoServiceAvailable(deprecated)

geolocation.getAddressesFromLocation(deprecated)

geolocation.getAddressesFromLocation(deprecated)

geolocation.getAddressesFromLocationName(deprecated)

geolocation.getAddressesFromLocationName(deprecated)

geolocation.getCachedGnssLocationsSize(deprecated)

geolocation.getCachedGnssLocationsSize(deprecated)

geolocation.flushCachedGnssLocations(deprecated)

geolocation.flushCachedGnssLocations(deprecated)

geolocation.sendCommand(deprecated)

geolocation.sendCommand(deprecated)

ReverseGeoCodeRequest(deprecated)

GeoCodeRequest(deprecated)

GeoAddress(deprecated)

LocationRequest(deprecated)

CurrentLocationRequest(deprecated)

SatelliteStatusInfo(deprecated)

CachedGnssLocationsRequest(deprecated)

Geofence(deprecated)

GeofenceRequest(deprecated)

LocationCommand(deprecated)

Location(deprecated)

LocationPrivacyType(deprecated)

LocationRequestPriority(deprecated)

LocationRequestScenario(deprecated)

GeoLocationErrorCode(deprecated)

你可能感兴趣的鸿蒙文章

热门推荐

标签云

最新文章

本文目录

geolocation.on(‘locationChange’)^(deprecated)

geolocation.off(‘locationChange’)^(deprecated)

geolocation.on(‘locationServiceState’)^(deprecated)

geolocation.off(‘locationServiceState’)^(deprecated)

geolocation.on(‘cachedGnssLocationsReporting’)^(deprecated)

geolocation.off(‘cachedGnssLocationsReporting’)^(deprecated)

geolocation.on(‘gnssStatusChange’)^(deprecated)

geolocation.off(‘gnssStatusChange’)^(deprecated)

geolocation.on(‘nmeaMessageChange’)^(deprecated)

geolocation.off(‘nmeaMessageChange’)^(deprecated)

geolocation.on(‘fenceStatusChange’)^(deprecated)

geolocation.off(‘fenceStatusChange’)^(deprecated)

geolocation.getCurrentLocation^(deprecated)

geolocation.getCurrentLocation^(deprecated)

geolocation.getCurrentLocation^(deprecated)

geolocation.getLastLocation^(deprecated)

geolocation.getLastLocation^(deprecated)

geolocation.isLocationEnabled^(deprecated)

geolocation.isLocationEnabled^(deprecated)

geolocation.requestEnableLocation^(deprecated)

geolocation.requestEnableLocation^(deprecated)

geolocation.isGeoServiceAvailable^(deprecated)

geolocation.isGeoServiceAvailable^(deprecated)

geolocation.getAddressesFromLocation^(deprecated)

geolocation.getAddressesFromLocation^(deprecated)

geolocation.getAddressesFromLocationName^(deprecated)

geolocation.getAddressesFromLocationName^(deprecated)

geolocation.getCachedGnssLocationsSize^(deprecated)

geolocation.getCachedGnssLocationsSize^(deprecated)

geolocation.flushCachedGnssLocations^(deprecated)

geolocation.flushCachedGnssLocations^(deprecated)

geolocation.sendCommand^(deprecated)

geolocation.sendCommand^(deprecated)

ReverseGeoCodeRequest^(deprecated)

GeoCodeRequest^(deprecated)

GeoAddress^(deprecated)

LocationRequest^(deprecated)

CurrentLocationRequest^(deprecated)

SatelliteStatusInfo^(deprecated)

CachedGnssLocationsRequest^(deprecated)

Geofence^(deprecated)

GeofenceRequest^(deprecated)

LocationCommand^(deprecated)

Location^(deprecated)

LocationPrivacyType^(deprecated)

LocationRequestPriority^(deprecated)

LocationRequestScenario^(deprecated)

GeoLocationErrorCode^(deprecated)